Wastewater disinfection by peracetic acid: assessment of models for tracking residual measurements and inactivation.

With its potential for low (if any) disinfection byproduct formation and easy retrofit for chlorine contactors, peracetic acid (PAA) or use of PAA in combination with other disinfectant technologies may be an attractive alternative to chlorine-based disinfection. Examples of systems that might benefit from use of PAA are water reuse schemes or plants discharging to sensitive receiving water bodies. Though PAA is in use in numerous wastewater treatment plants in Europe, its chemical kinetics, microbial inactivation rates, and mode of action against microorganisms are not thoroughly understood. This paper presents results from experimental studies of PAA demand, PAA decay, and microbial inactivation, with a complementary modeling analysis. Model results are used to evaluate techniques for measurement of PAA concentration and to develop hypotheses regarding the mode of action of PAA in bacterial inactivation. Kinetic and microbial inactivation rate data were collected for typical wastewaters and may be useful for engineers in evaluating whether to convert from chlorine to PAA disinfection.     

Material and energy recovery in integrated waste management systems. An evaluation based on life cycle assessment

This paper reports the environmental results, integrated with those arising from mass and energy balances, of a research project on the comparative analysis of strategies for material and energy recovery from waste, funded by the Italian Ministry of Education, University and Research. The project, involving the cooperation of five University research groups, was devoted to the optimisation of material and energy recovery activities within integrated municipal solid waste (MSW) management systems. Four scenarios of separate collection (overall value of 35%, 50% without the collection of food waste, 50% including the collection of food waste, 65%) were defined for the implementation of energetic, environmental and economic balances. Two sizes of integrated MSW management system (IWMS) were considered: a metropolitan area, with a gross MSW production of 750,000 t/year and an average province, with a gross MSW production of 150,000 t/year. The environmental analysis was conducted using Life Cycle Assessment methodology (LCA), for both material and energy recovery activities. In order to avoid allocation we have used the technique of the expansion of the system boundaries. This means taking into consideration the impact on the environment related to the waste management activities in comparison with the avoided impacts related to the saving of raw materials and primary energy. Under the hypotheses of the study, both for the large and for the small IWMS, the energetic and environmental benefits are higher than the energetic and environmental impacts for all the scenarios analysed in terms of all the indicators considered: the scenario with 50% separate collection in a drop-off scheme excluding food waste shows the most promising perspectives, mainly arising from the highest collection (and recycling) of all the packaging materials, which is the activity giving the biggest energetic and environmental benefits. Main conclusions of the study in the general field of the assessment of the environmental performance of any integrated waste management scheme address the importance of properly defining, beyond the design value assumed for the separate collection as a whole, also the yields of each material recovered; particular significance is finally related to the amount of residues deriving from material recovery activities, resulting on average in the order of 20% of the collected materials.     

Using nonequilibrium thin-disc and batch equilibrium techniques to evaluate herbicide sorption

Nonequilibrium disc-flow techniques may better reproduce dynamic soil-pesticide interactions than traditional batch sorption studies. Batch kinetic and equilibrium experiments and dual-label thin-disc flow experiments were conducted with atrazine (6-chloro-N-ethyl-N'-isopropyl-1,3,5-triazine-2,4-diamine) and imazaquin [2-(4,5-dihydro-4-methyl-4-(1-methylethyl)-5-oxo-1H-imidazol-2-yl)-3-quinolinecarboxylic acid] using a Demopolis silt loam (loamy-skeletal, carbonatic, thermic, shallow Typic Udorthent; 8% clay, 62 g kg(-1) organic matter, 7.6 pH). Batch kinetic studies with both herbicides revealed an almost instantaneous rapid phase and a much slower gradual phase. The rapid phase was complete after 5 min and equilibrium was reached at 24 h. The rapid phase accounted for 74% and 12 to 30% of the total amounts adsorbed for atrazine and imazaquin, respectively. The sorption of both the rapid and 24-h isotherms for each herbicide best fit the Freundlich equation. The rapid and 24-h K(f) values of atrazine were 1.38 and 2.41, respectively, and the N value of both phases was approximately 0.93. For imazaquin, the rapid and 24-h K(f) values were 0.056 and 035, respectively, and the N value for the rapid phase of imazaquin was 0.71, compared with 0.86 for the 24-h isotherm. In the dual-label thin-disc flow experiments, the average partition coefficient for atrazine at the peak soil concentration point was 1.54. This value closely agreed with the observed rapid-phase K(f) value of 1.38. In contrast, the thin-disc flow experiments failed to detect any imazaquin retention. The thin-disc flow method can allow for a greater resolution of rapid sorption kinetics, which is impractical with batch studies. Along with dynamic partitioning data, the thin-disc flow method may provide kinetics data that may better complement environmental models than coefficients generated with batch techniques.     

A spatial model approach for assessing windbreak growth and carbon stocks

Agroforestry, the deliberate integration of trees into agricultural operations, sequesters carbon (C) while providing valuable services on agricultural lands. However, methods to quantify present and projected C stocks in these open-grown woody systems are limited. As an initial step to address C accounting in agroforestry systems, a spatial Markov random field model for predicting the natural logarithm (log) of the mean aboveground volume of green ash ( Marsh.) within a shelterbelt, referred to as the log of aboveground volume, was developed using data from an earlier study and web-available soil and climate information. Windbreak characteristics, site, and climate variables were used to model the large-scale trend of the log of aboveground volume. The residuals from this initial model were correlated among sites up to 24 km from a point of interest. Therefore, a spatial dependence parameter was used to incorporate information from sites within 24 km into the prediction of the log of the aboveground volume. Age is an important windbreak characteristic in the model. Thus, the log of aboveground volume can be predicted for a given windbreak age and for values of other explanatory variables associated with a site of interest. Such predictions can be exponentiated to obtain predictions of aboveground volume for windbreaks without repeated inventory. With the capability of quantifying uncertainty, the model has the potential for large regional planning efforts and C stock assessments for many deciduous tree species used in windbreaks and riparian buffers once it is calibrated.     

Incubation time effects on imazaquin desorption as determined by nonequilibrium thin-soil disc flow

Because organic sorption in soil may never reach equilibrium, a thin-disc flow nonequilibrium method may be helpful in understanding herbicide-soil interactions. This research was conducted to (i) determine the influence of incubation time on imazaquin [2-(4,5-dihydro-4-methyl-4-(1-methylethyl)-5-oxo-1H-imidazol-2-yl)-3-quinolinecarboxylic acid] desorption from soil, (ii) examine the influence of solution flow velocities on desorption, and (iii) elucidate the most appropriate kinetic model to describe imazaquin leaching. Soil at 7.5% moisture w/w was treated with imazaquin and incubated for 24, 72, and 168 h. Treated soil was sealed in an in-line filter apparatus and rinsed with 5.0 mM CaCl2 at 0.33, 0.67, or 1.0 mL min(-1). Effluent was collected as 1.0-mL fractions for a total of 50 mL. Flow was stopped for 24 h. When flow resumed, fractions were collected for an additional 15 mL. After the initial desorption, 79% of the imazaquin incubated for 24 h was leached. Increasing incubation time beyond 24 h reduced imazaquin leaching. After both desorption events, 13% of the initially applied imazaquin remained in the soil incubated for 168 h, compared with 7% with soil incubated for 24 h. Elovich and Freundlich kinetics accounted for 98% of the variance observed in the imazaquin desorption curves. First-order and diffusion kinetics accounted for 91% of the variance. Incubating soil for 72 h before desorption reduced the rate of imazaquin desorption by approximately 12%, compared with the 24-h incubation treatment. Imazaquin desorption was not affected by wash solution flow rate. These data suggest that the kinetics of desorption in prolonged desorption events are limited by transport phenomena (i.e., particle and film diffusion).     

High-energy milling to decontaminate soils polluted by polychlorobiphenyls and atrazine

Mechanical energy has been used so far for running chemical reactions and for preparing new materials in absence of solvents. Very recently, the technology has been applied to solve environmental problems. In this paper, we describe the application of high-energy milling (HEM) for the remediation of soils contaminated by chlorinated organic compounds such as polychlorobiphenyls (PCBs) and agrochemicals like atrazine. NaBH₄ and LiAlH₄ have been successfully used for the total dehydrohalogenation of both classes of compounds, leaving a residue lower than 2 ppmw of the starting compound in the treated soil. LiAlH₄ was found to be more active than NaBH₄.     

Developing an empirical model of phytoplankton primary production: a neural network case study

We describe the development of a neural network model for estimating primary production of phytoplankton. Data from an enriched estuary in the eastern United States, Chesapeake Bay, were used to train, validate and test the model. Two error backpropagation multilayer perceptrons were trained: a simpler one (3-5-1) and a more complex one (12-5-1). Both neural networks outperformed conventional empirical models, even though only the latter, which exploits a larger suite of predictive variables, provided truly accurate outputs. The application of this neural network model is thoroughly discussed and the results of a sensitivity analysis are also presented.     

Partitioning gas tracer tests for measurement of water in municipal solid waste

A key component in the operation of almost all bioreactor landfills is the addition of water to maintain optimal moisture conditions. To determine how much water is needed and where to add it, in situ methods are required to measure water within solid waste. Existing technologies often result in measurements of unknown accuracy, because of the variability of solid waste materials and time-dependent changes in packing density, both of which influence most measurement methods. To overcome these problems, a new technology recently developed by hydrologists for measuring water in the vadose zone--the partitioning gas tracer test--was tested. In this technology, the transport behavior of two gas tracers within solid waste is used to measure the fraction of the void space filled with water. One tracer is conservative and does not react with solids or liquids, while a second tracer partitions into the water and is separated from the conservative tracer during transport. This technology was tested in four different solid waste packings and was capable of determining the volumetric water content to within 48% of actual values, with most measurement errors less than 15%. This technology and the factors that affect its applicability to landfills are discussed in this paper.     

Fate and degradation of triasulfuron in soil and water under laboratory conditions

The behavior and fate of triasulfuron (TRS) in water and soil systems were examined in laboratory studies. The degradation of TRS in both buffer solution and soil was highly pH-sensitive. The rate of degradation could be described with a pseudo first-order kinetic and was much faster at pH 4 than at pH 7 and 9. Aqueous hydrolysis occurred by cleavage of the sulfonylurea bridge to form 2-(2-chloroethoxy) benzenesulfonamide (CBSA) and [(4-methoxy-6-methyl-1,3,5-triazin-2-yl)amino] (AMMT). AMMT was unstable in aqueous solutions in any pH condition but it degraded more quickly at pH 4 and 9. CBSA did not degrade in aqueous solutions or in enriched cultures but it underwent a quick degradation in the soil. The rates of TRS degradation in sterile and non-sterile soils were similar, suggesting that microorganisms played a minimal role in the breakdown process. This hypothesis is supported by the results of studies on the degradation of TRS by enriched cultures during which the molecule underwent a prevalently chemical degradation.